Web Store Jewellery

How to Anchor Sill Plates to Concrete Foundations

How to Attach Sill Plates to Concrete Foundations

Many homeowners have the skills and capabilities to complete their own home improvement projects and renovations. This can save immense amounts of money as well as help home owners develop new skill sets they can use in the future as new home improvements are needed. Large projects such as home additions, new garages or adding a patio can also be completed without hiring a professional. When building a new structure, it is critical to securely fasten it to the foundation or slab with the use of a sill plate.

A sill plate, also known as a sole plate, is the bottom horizontal member of a wall or building to which the vertical studs will be attached. Most sill plates are made from lumber- usually a 2×4, 2×6, 2×8 or 2×10. The sill plate is typically anchored to the foundation or slab of concrete, depending on the application. Before the next steps can take place, a sill plate must be anchored to the foundation to ensure proper construction and safety.

Before You Get Started
Before trying to anchor a sill plate to any type of foundation, it is important to determine which system is best for attaching the sill plates.

One method for fastening sill plates is the use of cast-in-place anchors, commonly referred to as “J” Bolts. “J” bolts are anchors in the shape of the letter J with threads on the end opposite of the bent end. These bolts are set in place before the concrete is poured. The use of “J” bolts provides the best holding values, but can be problematic for the do-it-yourselfer due to the expertise needed and complicated installation steps. The “J” bolts must be installed completely perpendicular and if not, numerous problems will occur when trying to attach the sill plate. Also, this method cannot be used when building a structure where there is an existing foundation, such as replacing a dilapidated garage. This could pose a serious problem for many home improvement projects.

There is a type of concrete anchor that can be used when working with sill plates in less complicated applications and those with existing foundations. One option for installing sill plates is the use of Wedge Anchors. This type of anchor is a post-installed anchor, meaning that it is placed in concrete after it is fully cured. These fasteners are designed for use in solid concrete only. Wedge anchors are available from 1/4″ to 1 1/4″ in diameter. The length of the wedge anchor is completely dependent upon the thickness of the material to be fastened. To determine the size of anchor needed, it is important to check your local building codes or with an engineer or architect. It is also critical to verify the holding values required for your particular application since the quality of concrete will vary in every single circumstance.

Choosing the Size Wedge Anchor to be used
Once the required holding values have been determined, use this wedge anchor sizing chart to determine the appropriate diameter and length. There are some other considerations when using wedge anchors. These include:

• Use a wedge anchor of suitable length for the specific application. This is determined by using the equation below:
Minimum embedment for the diameter being used +
Thickness of the material being fastened +
Thickness of the nut and washer =
Minimum length of the wedge anchor needed

• Ensure that the anchor will be further than the minimum distance from the concrete edge. The rule of thumb is a minimum of five anchor diameters from the unsupported edge of concrete. For example, if your wedge anchor is 1/2″ in diameter, it must be installed a minimum of 2 1/2″ from the unsupported edge.
• Determine the grade of steel and/or plating of the wedge anchor required for the specific application. Wedge anchors are available in three different finishes: Zinc plated, hot-dipped galvanized and stainless steel.

Step by Step Instructions
Concrete Wedge Anchors can be installed in a few steps. Basic instructions follow:
• On the concrete, mark where your holes will be drilled. Remember that anchors must be placed: a minimum of five anchor diameters from any unsupported edge and there should be a minimum of ten anchor diameters between any two anchors.
• Using a hammer drill, drill your holes using a carbide-tipped
masonry bit. The hole diameter should be the same diameter as
the wedge anchor.
• Clear the hole of all debris using compressed air, a shop-vac
or wire brush.
• Before inserting the wedge anchor into the hole, be sure to place
the washer on the head and thread the nut a couple of turns. By
not fully threading the nut, the threads of the
wedge anchor are protected.
• Carefully place the sill place in the correct position and insert the
wedge anchors into each hole through the sill plate.
• Hammer anchors into every hole ensuring that they are
installed to the desired depth and securely in place. This will
be the supporting plate to which studs will be placed later in the
renovation process so secure placement is important for the overall safety of the structure.
• Using a torque wrench, tighten every nut to guarantee they are tightened to the required torque value.

For more detailed information and further instruction, take a look at this Wedge Anchor Installation Video.

When using concrete wedge anchors, it is important to remember:
• Wedge anchors are very effective when the concrete is in good condition and minimum edge distances and spacing are maintained.
• Hole size is critical to the holding values of the wedge anchor. Hole diameter is equal to the anchor diameter when using ANSI standard carbide bits. The tolerances of ANSI standard bits are specifically matched to work well with wedge anchors.
• Wedge anchors have a required torque value. Take a look at this important anchor technical information page to determine the diameter of anchor to use for a range of required .

As with any home improvement or anchoring project, it is important to keep safety in mind and follow instructions carefully. Always remember to wear safety goggles, handle all tools with extra care, and follow all technical specifications. This article is meant to serve as a basic overview of the steps for completing this project. Always refer to manufacturer’s instructions or consult a contracting expert. With a little research, planning and patience you are now ready to expand your home or create some new space!

About the Author

Article Written By: Bob Carlisle, President of Concrete Fasteners

Concrete Fasteners, Inc. has over 40 years experience selling concrete fasteners. We ship to all 50 states and many countries. We can ship out one box or a whole pallet of concrete anchors. Our products are of the highest quality, “your satisfaction is guaranteed.” We ship all orders the same day order is received.

Yellow Gold Plated Cube Studs | Hip Hop Stud Earrings | KingIce.com

Silver Plated Squared Kiddush Cup and Saucer Set — Pyramid Studs $75.00 The silver plated pieces of this set are made unique with their design of bumps in the distinct shape of four sided pyramids.This set of Kiddush cup and saucer is to be cherished forever not just as a magnificent piece of beauty, but also as a rich reminder of Jewish culture and history. The intricate design of this matching set is raised bumps in the finely shining silver that are in fact, rows a…

Studex Sterilized Piercing Earrings * Ear Stud * Gold Heart $3.76 STUDEX ear studs are the best-selling ear piercing studs worldwide. This fact reinforces our determination to produce our ear studs with the highest possible precision and quality. Ear piercing studs are available in many styles. * 24K Gold Plated Ear Stud * Sterilized Piercing Earrings * Size: Regular (3mm) * Heart Shape * One Pair * Made in the U.S.A….

Studex Sterilized Piercing Earrings * Ear Stud * Gold Stud * Traditional $0.90 STUDEX ear studs are the best-selling ear piercing studs worldwide. This fact reinforces our determination to produce our ear studs with the highest possible precision and quality. Ear piercing studs are available in many styles….

Hair Clip – H85 – Banana Style Encrusted in Genuine Crystal Stones (5-1/8 long) – Silver Tone Metal ~ Clear $17.95 Absolutely stunning!! Gorgeous super sparkly crystals stud this banana style hair clip and turns any hairstyle into a glamorous statement. Perfect accessory for a french twist or flippy “do”. Hairclip measures 5-1/8″ long, tapers from 5/8″ wide down to 1/4″ wide and tapers from 1-1/4″ tall down to 1/4″ tall. Silver tone finish metal….

JJ Weston classic silver plated and onyx cufflinks and shirt stud set with presentation box. Made in the U.S.A $75.00 A classic accent for formal dress. Silver plated round cufflinks and shirt stud set enhanced with onyx. Simply stunning. Gift boxed….

Retro darkened silver plated cufflinks and shirt stud formal set with red enamel. Presentation boxed. Made in the USA $39.99 How cool is this set! A real retro look designed to give maximum punch to your tux. Darkened silver plated cufflinks and shirt stud formal set with a popping red enamel. The cufflinks measure 3/4 inch in diameter and the studs 1/2 inch. Presentation boxed. Made in the USA…

JJ Weston Classical elegance. Silver plated set of cufflinks and shirt studs set with mother of pearl with presentation box. Made in the U.S.A $75.00 Classical elegance. Silver plated cufflinks and shirt stud set. The cufflinks have swivel bar fittings. Radius edging. Accented with mother of pearl. Simply superb. Gift boxed. Made in the U.S.A…

Your On-The-Go Filming with FLEXCOPE Windshield Mount for Flip UltraHD Camera, Kodak PlaySport Video Camera, iPhone 4S, HTC 4G LTE, HTC Vivid, HTC Inspire, Droid RAZR, and Samsung Galaxy S II $19.99 Equipped with a heavy-duty Dia. 90mm suction cup, two easily interchangeable device adapters (one for mounting your digital camera/camcorder and the other your phone/GPS), this smartly designed Universal Windshield Mount from Flexcope allows you to securely mount virtually any portable electronic device that weighs up to 4.0 pounds (1.81 kilograms), on virtually any flat surface that is smooth or …

Vinyl Insulated #10 Size Fork Terminal 16-14 Gauge (Blue) – 100 Pieces $4.92 16-14 gauge, blue vinyl insulated spade type forked tongue terminals, #10 inside diameter. Sold in packs of 100. The vinyl-insulated standard fork terminal is made from tin-plated copper, with the tongue having a specified stud slot (size 6 thru 10) and a barrel covered by a molded vinyl funnel entry sleeve which is color coded and sized for a specified (AWG) wire range (22-18, 16-14, 12-10)….

FireStik K-24 Plated heavy-duty side mount $5.58 These mounts are similar to our popular 3-way mounts without the clamp. If you know that your installation will not require the clamping bracket supplied in the 3-way mounts, you can save a couple of dollars with these mounts. All of these mounts are specifically used for mounting antennas to a flat vertical surface, such as the side of a van or motorhome. These brackets are made from cold rolled …